Ocean Mist PJ2C(RBG)-R 3 Head Lighted Floating Fogger w/ Remote Control
- Measures 7.5" diameter x 2.5" height.
- Includes 36 multi-color LED lights and fog/light remote control and 68 watt transformer.
- Requires about 3" minimum water depth.
- 33 ft. cord length.
- Includes float to allow for flotation in deep water.
- Ceramic Disc Size: 20 mm.
- Ultrasonic foggers can be used with distilled, tap, well or pond water. See below for details!
The 3 Head Lighted Floating Fogger w/ Remote Control is an energy-efficient water feature enhancement; a floating conversation piece! Transform your water garden into a theatrical outdoor entertaining space with colorful lights and real fog. The 3 Head Lighted Floating Fogger w/ Remote Control uses ultrasonic technology to produce a perpetual rolling mist, while 36 bright LED lights alternate colors for a dynamic lightscape. Requiring no additional equipment, plumbing, or chemicals, this fixture is easy to set up and safe for your fish.
The 3 Head Lighted Floating Fogger w/ Remote Control comes with 36 multi-color LED lights and a fog/light remote control. The remote control allows you to select from various programs: on/off, single color, multi-color, color changing, or flashing color. The entire unit is contained in a floating buoy and has a 33' cord. The unit comes with a 68W UL listed transformer.
Water Choices and Maintenance for Ultrasonic Foggers and Misters:
If you use tap, rain, well or pond water, the fogger's sensor for low water level should work properly and shut the fogger off when the water level drops below the recommended level. However, minerals common in these water sources will often corrode the (replaceable) ceramic fogging disc(s) faster, requiring it (the disc) to be replaced more often.
If you use distilled water, your ceramic discs will last longer because of the water quality, but you will need to be very vigilant when checking the water levels so the fogger does not run dry. This is important because when using purified water the fogger's sensor for low water will not work properly (because it cannot sense the conductivity in the water). The fogger may not sense when to shut the fogger off (to prevent burnout of the ceramic disc) if the water level drops below the recommended level.
Using a fogger float or buoy, is highly recommended as it will keep your fogger at its recommended depth and can greatly increase the longevity of the unit. Floats are especially important if you will be using your fogger with distilled water since the low water sensor of the fogger may not operate properly in this circumstance.
Available Fogger Floats or Buoys: Can be found here.
Replacement Ultrasonic Fogger Discs: Can be found here.
SPECS:
# PJ-2C(RBG)-R
33' power cord
120V/AC24V
Includes 68W UL listed transformer
Disc size: 20 mm in diameter.
Warranty: 2 months
- Measures 7.5" diameter x 2.5" height.
- Includes 36 multi-color LED lights and fog/light remote control and 68 watt transformer.
- Requires about 3" minimum water depth.
- 33 ft. cord length.
- Includes float to allow for flotation in deep water.
- Ceramic Disc Size: 20 mm.
- Ultrasonic foggers can be used with distilled, tap, well or pond water. See below for details!