Firestone QuickPrime Plus Seam Primer for EPDM pond liner | 1 Qt.

Designed to clean and prime EPDM pond liner, use QuickPrime Plus before application of seam tape or splicing tape. This Primer chemically activates the pond liner geomembrane surface and improves the seam quality adhesion. Can also clean the EPDM pond liner prior to the application of Firestone Splice Adhesive.

It is highly recommended to clean the rubber pond liner with this product before using seaming tape for the repair!

Application Directions:

Stir thoroughly before AND during use.  Apply this primer at the rate of 50-60 sq. ft. per quart per side to the liner surfaces before applying the seam tape. Use back and forth strokes with heavy pressure along the length of the splicing area. Should be applied with a scrubber pad (Liner repair kit which includes Scrubber pad can be purchased from here)

Allow to dry about 30 minutes before applying any seaming tape.

Safe for fish ponds when used as directed.

Contents: 1 quart (0.946 L)

Shelf life: Approximately 12 months if stored between 60 and 80 degrees Fahrenheit.

• Designed to clean and prep EPDM liner before applying seam tape or patch.
• This product has chemical and adhesive qualities that help bond 2 EPDM liners together.
• Fish-safe when applied as instructed.
• Dry time is approximately 30 minutes.
• Apply with QuickScrubber Plus Pad or similar scratch pad (Can be purchased from here)
• Contents: 1 Quart.