US Dollars
EasyPro ETP10N 1 HP 5900 GPH Submersible Trash Pump
Write a Review
EasyPro
EasyPro ETP10N 1 HP 5900 GPH Submersible Trash Pump
- Heavy duty solids handling trash pump.
- Can handle sand, solids, leaves, algae and other pond debris up to 3/8 x 1 inch.
- Ideal for pond cleanouts, water features and large waterfalls.
- Powerful pump, has an impressive flow rate of 5,900 gph with a max head height of 57 feet!
- Has automatic overload and thermal protection with self reset.
- 2-year warranty.
The continuous duty EasyPro ETP10N 1 HP 5900 GPH Submersible Trash Pump can handle not so friendly water conditions. Use it for waterfalls and other water features where leaves and algae are problematic. This pump is also ideal for removing solids in recirculating systems, dewatering or draining that involves sand and sludge, and other dirty or clean water uses.
This 1 HP submersible pump features a wear resistant TPU impeller as well as automatic overload and thermal protection with self reset. The motor housing is aluminum. Its top housing is a composite with glass fiber reinforcement, and its bottom housing is cast iron. The max flow rate of the pump is 5,900 gph. Its max head is an impressive 57 feet!
It operates on 115 volts and 11.5 amps of electricity, using 750 watts. The pump has a 20 ft. long power cord and the discharge outlet is 2 inch FPT.
| Model | Max Flow Rate | Horsepower | Max Head Height | Wattage / Amperage | Outlet | Dimensions (LxWxH) |
|---|---|---|---|---|---|---|
| ETP10N | 5,900 gph | 1 HP | 57 ft. | 750 watts / 11.5 amps | 2" FPT | 17" x 12" x 8" |
- Heavy duty solids handling trash pump.
- Can handle sand, solids, leaves, algae and other pond debris up to 3/8 x 1 inch.
- Ideal for pond cleanouts, water features and large waterfalls.
- Powerful pump, has an impressive flow rate of 5,900 gph with a max head height of 57 feet!
- Has automatic overload and thermal protection with self reset.
- 2-year warranty.