Aquasurge Pump Conversion Kit- 29705

If you had an AquaScape Pro Pump (3PL or 5PL) and want to replace it with a more energy-efficient AquaSurge Pump, then this AquaSurge Conversion Kit (# 29705) achieves that easily!
This amazing AquaSurge Conversion Kit contains the necessary parts for the plumbing conversion by using your existing Check Valve Assembly and Aquascape Skimmer.

Installation Instructions below:

If you have the Classic Series Skimmer and Check Valve, use the AquaSurge Conversion Kit (part # 29705) to connect the 1.5 inch female threaded outlet to the 1½ inch male thread x 2 inch slip adapter. You need to cut off the 2 inches of black flexible PVC pipe located between the check valve and pump. Then the 1.5 male threaded part should be screwed into the pump. Lastly, the existing 2 inches of flexible PVC should be glued into the other end of the adapter.
If you have the Signature Series Skimmer and Check Valve, use the AquaSurge Conversion Kit to connect the 1.5 inch female threaded outlet to the 2 inch Aquascape Check Valve Adapter. It has a 1.5 inch male threaded part which should be screwed into the AquaSurge and 2 inch Aquascape custom-made flange to fit into the Aquascape 2 inch Check Valve.
You can now throw away the old parts as they will be of no use.